Laser Material Processing There are 24 products.
Laser 2000 offers a wide range of products and solutions for laser material processing, including the corresponding accessories. These products include lasers with various options (for wavelength, power). Pulsed lasers vary from ns pulse durations up to ultrashort pulse and/or femtosecond lasers.
Possible fields of application for these lasers range from metal welding and plastic welding, to surface treatment, to cutting a wide range of materials, and more:
• Welding metals
• Hardening metals
• Welding plastics
• Laser soldering/brazing (especially in automotive engineering)
• Build-up welding/coating/repair welding
• Cutting metals and other materials
Laser Beam Profiler, 6,5 mm x 4,8 mm
DataRay's WinCamD LCM beam profile camera provides now USB 3.0 frame rates of 30Hz at very high resolution.
Dataray Analizador de perfil de gran...
Analizador de perfil de haz láser (beam profiler) por cámara para aplicaciones con haces de gran tamaño, hasta 20 x 15 mm
BeamR, rot. Single Plane Scan
The scanning system BeamR with rotating slots for the measurement of lasers with diameters of 0.5 microns to about 3 mm
converter optic, UV
By means of the described UV converter optics the measurement of the intensity distribution of UV laser radiation with standard Si-based CCD or CMOS cameras is possible.
converter optic, IR
Ópticas conversoras para analizar el perfil del haz láser en el infrarrojo (IR)
Laser Beam Profiler, 14 mm x 11 mm
The TaperCamD-UCD12 system is specialized on the analysis of extended laser beams with a compact, high-resolution 14-bit CCD digital camera
BeamScope P8, linear Scan
The unique in the linear scanning system BeamScope P8 is the measuring tongue of the detector. To move perpendicular to the beam propagation direction through the beam and thus performs a linear scanning motion.
Vertical Stack Laser Diode Active Cooled
Focuslight CW and QCW high-power active cooled Vertical Stacks with 2 to 40 bars at 100 to 250 W optical power output per bar (@ 808 - 980 nm)
Variable combined attenuator Wheel
Variable attenuator for beam profiler in the ray analysis with 99 different attenuation values in the range of 1010-0 (0 to 100 dB).
MLase Excimer Laser MLI series
The modern and compact MLI Excimer Laser series from MLase are UV light sources at 193 nm or 248 nm with high pulse energies up to 16 mJ and repetition rates up to 1,000 Hz !
