Laser Test & Measurement technology has experienced rapid development due to the high level of automation for modern production processes and the increasingly widespread use of lasers. Lasers make many more, and, above all, more precise production processes possible than ever before. In order to achieve the greatest levels of accuracy, it is essential to perfectly know and adjust the laser in use. For this purpose, different measuring instruments are available in the realm of Laser Test & Measurement technology.
Alongside the beam profile, the complete caustics and beam quality (M²) can also be measured. In addition, the position, the angle, and the focus position of the laser beam are important in order to be able to use the laser in the correct place. The wavelength and the pulse are also characterized. These kinds of measuring systems are used to evaluate and adjust lasers, and to thereby stabilize them in every way. These measuring methods are indispensable in production engineering and quality assurance, and are also ideally suited for research and development tasks.
DataRay's WinCamD LCM beam profile camera provides now USB 3.0 frame rates of 30Hz at very high resolution.
Analizador de perfil de haz láser (beam profiler) por cámara para aplicaciones con haces de gran tamaño, hasta 20 x 15 mm
The WinCamD-XR System is the newest standard system for laser beam diagnostics with a compact, high-resolution 16-bit ADC CCD digital camera.
By means of the described UV converter optics the measurement of the intensity distribution of UV laser radiation with standard Si-based CCD or CMOS cameras is possible.
The TaperCamD-UCD12 system is specialized on the analysis of extended laser beams with a compact, high-resolution 14-bit CCD digital camera
The unique in the linear scanning system BeamScope P8 is the measuring tongue of the detector. To move perpendicular to the beam propagation direction through the beam and thus performs a linear scanning motion.
The WinCamD-UCD23 system is a standard system for laser beam analysis with a compact, high-resolution 14-bit CCD digital camera
This optical beam reducer to be connected to the C-mount a camera WinCamD-ray analysis is used when the beam diameter of the laser is much greater than the sensor chip or of the taper.
The Beam Profiler WinCAM-UCD12 is a complete beam analysis system with 14-bit CCD camera from the successful WinCamD family
The Beam Profiler BladeCam-XHR and WinCamD-XHR cameras are high resolution beam analysis cameras with 3 megapixels
The BeamScope scanhead can be mounted at different angles (0°, +/-45°, +/-90°).