Laser Beam Profiling and Quality Measurements There are 12 products.
The quality of the radiation is often referred to in material processing and measurement technology. Depending on the application, the quality is determined by the temporal and local stability of the output power, the width of the frequency spectrum, the temporal and local coherence, and the magnitude of the beam divergence, which is related to the extent to which the radiation can be focused.
Laser Beam Profiler, 6,5 mm x 4,8 mm
DataRay's WinCamD LCM beam profile camera provides now USB 3.0 frame rates of 30Hz at very high resolution.
Dataray Analizador de perfil de gran...
Analizador de perfil de haz láser (beam profiler) por cámara para aplicaciones con haces de gran tamaño, hasta 20 x 15 mm
converter optic, UV
By means of the described UV converter optics the measurement of the intensity distribution of UV laser radiation with standard Si-based CCD or CMOS cameras is possible.
Laser Beam Profiler, 14 mm x 11 mm
The TaperCamD-UCD12 system is specialized on the analysis of extended laser beams with a compact, high-resolution 14-bit CCD digital camera
BeamScope P8, linear Scan
The unique in the linear scanning system BeamScope P8 is the measuring tongue of the detector. To move perpendicular to the beam propagation direction through the beam and thus performs a linear scanning motion.
beam reducer - Afocal
This optical beam reducer to be connected to the C-mount a camera WinCamD-ray analysis is used when the beam diameter of the laser is much greater than the sensor chip or of the taper.
Laser Beam Profiler, 7.1 mm x 5.4 mm
The Beam Profiler BladeCam-XHR and WinCamD-XHR cameras are high resolution beam analysis cameras with 3 megapixels
Rotatable BeamScope Mount
The BeamScope scanhead can be mounted at different angles (0°, +/-45°, +/-90°).
miniature beam profiler
The Beam Profiler BladeCam-HR is suitable with a housing depth of only 6.5 mm suited for beam profile analysis at locations with limited space.
