Produktbeschreibung
PHAST Camera Link Fibre Adapter The PHIRE system is a compact converter system for the Camera Link interface to optical fibre and back. The PHast range uses duplex fibres. With two different pixelclock ranges of PHast all Base Medium and Full Interface camera are supported, up to 10 taps x8 bit with a maximum throughput of 670Mbyte/s.These systems are also called fibre adapters, camera link fibre adapters and camera link extender, meaning all the same.
Main features:- Offers 670MB/s bandwidth
- Plugs directly into cameras and framegrabbers without CL cables - saves space and cost
- Supports base, medium and full configurations
- Sends high-speed real time image data up to 250meters over LC duplex fibre cables
- Single 5~24VDC power supply
- OEM solutions available
Technical SpecificationsOperating temperature | 0~40°C |
Voltage | DC 5 ~ 24V |
Current | 430mA @ 12V |
Power consumption | 2,4W per Unit |
Housing size | 59x42x17mm |
Plug Type | Hirose MQ172X-4PA |
Camera Link Interface All Systems use the MDR26 plug for the CL connection to camera and frame grabber.
Optical Interface for Multimode Duplex Fiber Wave length | 850nm |
Min Optical Tx output Power | -10 dBm |
Min Optical Rx Power | -15 dBmPlug Type |
LC duplex | Fiber Type |
50/125µm or 62.5/125µm MM Fiber |
Product overviewModel Name | Max Pixel Clock | Max. Data Format | Sensor Typ |
PHT-PHF-66-M025 | 24~66MHz | 10 Taps, 8Bit | Line and Area Scan |
PHT-PHF-85-M025 | 60~85MHz | 10 Taps, 8Bit | Line and Area Scan |
Items Provided 1x CM-Base (transmitter))
1x CM-Full (transmitter))
1xFG-Base (receiver))
1xFG-Full (receiver))
2x 12V DC output international wall mount AC/DC power adapters with snap locking plug
The virtual serial port of the Framegrabber is need to configure the PHast System once. If the framegrabber does not support the virtual serial port a adapter, PHT-PHF-CONF-01, is available for this purpose.
Suitable CL-Cables
Glasfaserkabel are on our web page available.
Remarks: Distance depending on fibre type and system design. Transmission distance above is estimated minimum distance for 50/125 MM fibre and 9/125 SM fibre. Extra optical losses in the system will reduce the transmission distance.